Hassio-addons / addon-ssh. Sponsor Sponsor hassio-addons/addon-ssh. Has the option to access the Docker instance running on the host system. All right, everything is ready, so you can now install Docker with: apt-get install docker-ce docker-ce-cli containerd.io Then, to verify that Docker was installed correctly, you can run the command: docker run hello-world The last thing that you want to do before installing Hass.io is to make sure that Docker starts when the server boots.
I can’t get flashing over USB to work.¶
ESPHome depends on the operating system the tool is running on to recognizethe ESP. This can sometimes fail. Common causes are that you did not installthe drivers (see note below) or you are trying to upload from a Docker containerand did not mount the ESP device into your container using
Starting with ESPHome 1.9.0, the ESPHome suite providesesphome-flasher, a tool to flash ESPs over USB.
First, you need to get the firmware file to flash. For Hass.io add-on based installs you canuse the
COMPILE button (click the overflow icon with the three dots) and then press
DownloadBinary. For command line based installs you can access the file under
Hassio Docker Image
Then, install esphome-flasher by going to the releases pageand downloading one of the pre-compiled binaries. Open up the application and select the serial portyou want to flash to (on windows you can use the “device manager” to check if it’s the right one).
Select the firmware binary and finally press “Flash ESP”.
Hassio Docker Windows
Hassio Docker Update
If the serial port is not showing up, you might not have the required drivers installed.ESPs usually ship with one of these two UART chips:
Hassio Docker Compose
If you’re just seeing
Connecting....____.... on the screen and the flashing fails, that mightbe a sign that the ESP is defect or cannot be programmed. Please double check the UART wiresare connected correctly if flashing using a USB to UART bridge. For some devices you need tokeep pressing the BOOT button until flashing has begun (ie. Geekcreit DOIT ESP32 DEVKIT V1).